30W /60W SMD 5050 Led 130x130mm Waterproof IP66 LED Street Lighting Moudle
Detailed
| Distribution | Module Size
(mm) | Lens Size
(mm) | Power | LED | LED
QTY | Warranty |
| CM-S130-XX-30/60W | 160x140 | 130x130 | 30-60W | 3030/2835 | 64 | 5years |
| CM-S130-XX-5050-30P | 160x140 | 130x130 | 30-60W | 5050 | 30 | 5years |
Description
- 30W /60W SMD 5050 Led 130x130mm Waterproof IP66 LED Street Lighting Moudle
- The module is waterproof with an IP66 rating
- LEDs turn on instantly without any warm-up time, providing immediate illumination when needed.
- LEDs can be easily dimmed to create different lighting moods and save even more energy.
- resulting in significant energy savings and reduced carbon emissions.
- The LED modification kit does not contain any mercury or lead, does not produce ultraviolet rays that damage the eyes, and has no light pollution
Specifications
| Product Name: | CM-SZ130130-XX-30/60W |
| Beam Angle: | 60° 90°/80*150° |
| Temperature: | 4500~5700 |
| Ambient temperature range: | -40℃～+50℃ |
| Lumen s Flux(Type.) | >130lm/W |
| Heat sink | AL Extrusion 6063 |
| LIFE SPAN | ≥50000 小时 @Ta=25℃ |
| Application: | Flood Lighting,Led Street Lighting ,Tunnel lighting |
| WARRANTY: | 5 Years |
| Quatity Guarantee: | If you receive a defective item, please
email us a picture of the defective part. We will arrange for a reshipment or refund to you. |
| Main Maket | Europe,South America,North America,Asia ect |
Shipping and Delivery
Trade Terms: | EXW , FOB , CNF , CIF |
| Payment Terms: | T/T , PayPal , Western Union, Moneygram |
| Delivery time: | 2-3 working days for samples order, 5-7 working days for bulk order |
| Shipment Terms | By Sea, By Air, By Express like DHL, Fedex, UPS, TNT, etc |
IES
Drawing
Notices
- It is strictly forbidden to squeeze during transportation, and it is forbidden to be subjected to violentmechanical impact and exposure to rain.
-
Store in a cool, dry, clean environment.
-
Read the product specifications carefully before use to avoid accidents or damage.
-
Please check carefully before use. If you find any abnormality during use, please contact us.
-
When using, the surface of the module has a certain temperature rise, which is a normal phenomenon. It is strictly forbidden to touch the light source by hand.
-
Before installation, you must ensure that the module is intact and ready for installation.
-
Do not apply external force or throw to the module.
-
Select the drive power, pay attention to the voltage range and drive current, and use it with the module.
-
When installing the module, pay attention to the direction of the arrow, and the arrow should point
to the side of the road.
FAQ
1) Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Mixed samples are acceptable.
2) When can I get the quotation?
A: We usually give you an offer within 12 hours after we get your inquiry. But if you want to get the offer ASAP,please call us or email us that we can reply to you in time.
3) What is the lead time?
A:Sample needs about 3-5 days prepared; mass production time needs 7-10 days normally.
4) What are your main products?
A: Our main products are outdoor lenses and indoor lenses .such as:Street &AREA Light lens ,Single lenses,High Bay Light ,ect.
